How to remove the faucet of the washbasin?
2023-01-09
As we all know, the bathroom usually has a washbasin. There must be a water tap above the water wash. How to remove the Bathroom Faucet of the washbasin: First of all, if we need to understand what kind of circumstances can we remove the faucet. When our washbasin is blocked, leaked, or unable to save water, it is likely to be caused by the laundering faucet and the problem. It is necessary to consider the removal of the faucet of the washbasin. The steps of disassembly are as follows: 1. Before we are going to remove the faucet of the washbasin, we have to find the pipeline water inlet valve. The location of the water inlet valve is often on the wall of the face of the face. We need to twist the corner valve and then break the water of the water pipe. Otherwise, when we dismantle the faucet, we will easily cause a lot of water to occur in the mouth of the pipe and cause water waste. 2. After the angle valve is twisted, a part of the water will remain in the water pipe. Open the faucet to put the remaining water finished; 3. When installing the tap of the basin, connect the water pipe of the tap of the basin of the basin with the water pipe with the water inlet pipe. When removing the water pipe with one hand, twist the wrench with one hand, remove the water pipe in the water pipe to connect the end of the tap of the pot water; 4. When installing the faucet of the basin, it needs to be tight after connecting the water pipe; the nut locks it, so after removing the water pipe, find the fastener of the pelvic faucet, use a pliers or wrench to remove it, and remove it. Take out the tap of the basin. 
Ms. Iris Deng